Sunday, 15 November 2026
Sewing Box Renovation...
Monday, 1 March 2021
Homemade garden fork handle...
It's the time of year where my thoughts turn to all things gardening and so I start making plans and lists of jobs to be done.
Trouble is I broke the handle of the only fork I have for use at home, I have a couple down the allotment, probably should get another for home use (how many forks is too many?) I broke the handle whilst trying to dig up some very old rose bushes that someone in our local area had put on a freecycle type website, in the end I got eight very large (rooted) rose bushes, which are now in the garden in various places, which is good, but it did leave me with a broken garden fork.
So off to the workshop to make a new handle, below is the video.
Thanks for visiting.
Thursday, 14 January 2021
Repairing our 15 year old tumble dryer...
This is a job I've been meaning to get round to, we've had the same tumble dryer for 15 odd years and it started to make a horrible grinding noise, it was an easy enough fix once I'd found the parts for it.
Cosmetically the dryer is looking tired, but it still works fine and honestly we don't use it that much as we prefer to dry clothes outside where possible, but for rainy days it's a handy thing to have.
We could have bought a new dryer, but didn't want to spend that much money and repairing was the cheaper option and fingers crossed it'll last a few more years now.
Here's a video of me fixing it -
Thanks for watching.
Sunday, 9 August 2020
Paint scraper /decorators knife repair...
It's been a while since I've posted, so to start off here's a quick repair job.
I've been decorating the house and managed to break the scrapers / decorators knives I've been using for various tasks and seeing as I didn't want to spend any money buying new ones, or if I'm honest given the current lock down I didn't want to have to queue for ages at a diy store to buy new ones, so of to the shed to repair the ones I had, there's a short video at the end of the post if you're not in the mood for reading.
One fixed already -
![]() |
| Repaired and to be repaired. |
You can see the problem, there should be a plastic handle attached to the metal part, so I need to make one of those and as it turns out it was easy given the piles of random bits of wood I have.
First I marked 2 points where I intended to drill -
![]() |
| Ready for drilling. |
Then after drilling the holes I found a couple of long(ish) bolts, these need to be long enough to go through the wooden handle.
Like so -
![]() |
| These bolts should do. |
Next a handle is needed, for this I used an old spindle from a wooden bed, sometimes having random things pays off, I just cut one of the spindles in half which gave me 2 handles.
Handle picked and cut -
![]() |
| Now to make the blade fit in the handle. |
To make the blade fit you'll need to make a cut in the centre of the wood you use, a square piece will do, but I'd round it off a bit to make to more comfortable to hold.
Cut made -
![]() |
| Now to fit the blade. |
Mark drill points on the piece of wood, I used the blade I'd already drilled as a template, you'll need to make 2 holes in the wood for the bolts to go through, and it's a good idea to counter sink the holes as well.
Almost done -
![]() |
| To be drilled. |
Bolts fit -
![]() |
| Not much left to do now. |
Assemble the scraper and finish it off, I cut of any extra bits of thread from the bolts and gave the handles a quick sand, they don't need to be pretty as they'll be used and abused, but will last longer than they did with the plastic handles, they do feel a lot sturdier and like they can take more punishment, so although it's a repair it's also an improvement on the original.
Assembled -
![]() |
| Bit of finishing needed. |
All done -
![]() |
| There's a certain rustic vibe to these. |
Quick video/slideshow detailing the steps -
Thanks for reading.
Friday, 31 May 2013
Mouse surgery ... ...
Here's the patient -
![]() |
| Reminds me of Moya from Farscape. |
The button in question is the one I use when scrolling through documents, web pages and any other type of scrolling, you can see it in the picture above, it's the small button above the large silver one, the way it works is I hold the button down and move the ball and what ever I'm looking at will scroll, and I can scroll vertically (up and down) and horizontally (left and right) which is handy, at least when the button works.
Now I could just go out and buy a new one, but that's the best part of £20 (or more) depending on where you buy it from, and to be honest to fix it costs no more than about £2 or if you have an old mouse lying about then it costs nothing to fix, you just need a soldering iron and some solder.
Here's the offending button, it's a simple micro switch -
![]() |
| Easy to remove, and replace. |
The three contacts -
![]() |
| Takes just a minute or two to desolder it. |
![]() |
| That wasn't so hard. |
![]() |
| I removed these from an old mouse. |
![]() |
| A dinosaur in mouse terms. |
![]() |
| There are usually screws hiding under the little plastic pads. |
![]() |
| Found you ! |
![]() |
| Three switches, this will be the same with most mice. |
![]() |
| I picked the best of the switches I salvaged. |
Monday, 15 October 2012
How to fix a lampshade ... ...
Whilst the lamp itself is fine it appears the shade bore the brunt of the impact, so I figured well, might as well see if I can't do something with it, rater than bin it.
The shade -
| Missing some important bits. |
| Blank canvass, so to speak. |
| Onto the next phase. |
| It's a bit bigger to allow for aligning. |
| Might have over done it a tad. |
| I used LibreOffice Draw (like OpenOffice Draw) for the shapes. |
| Catman approves. |
| And it's done, saved having to buy a new one. |
| I quite like it. |
| Pretty cool I think. |
-
For the last week or so I've been full steam ahead on building a chicken coop, we said we'd get some last year, but weren't rea...
-
First post of the year, bit later than I'd intended, but sometimes that's just the way it is. Anyway while I'm twiddling my t...
-
It's that time of year when a broom comes in handy, and not just as a means for witches to get about, so why not have a go at making yo...
-
So carrying on from our Trebuchet project we decided to make another type of siege engine, this time an Onager (sometimes referred t...
-
The other day I figured I'd make a wooden peg loom, and after a little research I set about finding materials and tools. I have to be...
-
Since we had our allotment, and actually got it into a sort of usable state we haven't visited it quite so frequently, I went down toda...




















