Rough recycling ... ...

I've been doing a spot of recycling, all be it very roughly, well it's more of a trying to find a use for all the things I've kept exercise ;-)

The first thing is some where to put my scroll saw, so far I've used it on the floor, on the kitchen table (wife not best pleased about that one) and various other places, none of which are very good places to use a scroll saw.

So I recycled my old metal computer desk into a table for my scroll saw, I even kept the wheels on it for extra mobility, and as it used to be a desk it's about the right height already.

Here it is -

Not much to look at.

I didn't really have to do that much to be honest, basically I just switched the frame work about, the sides of what was the desk were placed on what would have been the front and back of the desk, I had to drill new bolt holes, and add an extra bit of support at the back, again using a piece of the old desk.

Back support -

Drilling new bolt holes was easy.

I did originally intend to just bolt the saw to the new table, but found when using the saw at high speeds things were a little less than stable, so I added a wooden top for a little less wobble, it works well and means I can now sit at a good height and cut stuff out of wood, which is handy as I'm planning to make a dolls house for my daughter and I'll need to do a lot of cutting out for things like windows and such like.

Wooden top -

Not very neat, but it works.

I even kept the bottom shelf, figuring this would be handy for storing stuff on.

The next little bit of recycling involves 2 hoovers (yes 2)

This is very much a hack, and had I spent more time I would have made something a little neater, basically I do a lot of wood turning and other very dusty related stuff in my shed and I decided I needed some kind of dust removal system.

I did have an old hoover which I used for cleaning up and clearing dust, but it was old and more or less knackered when I started using it in the shed, needless to say it didn't last very long, and until our last hoover broke it just sat in the shed waiting to be used for something.

Dust extraction systems can be quite pricey, so I figured building my own was the best way to go, all I really needed was a new motor to power the extractor, and as luck would have it we got a new hoover and so I kept the broken one, which wasn't usable in the house any more, but was perfect for what I wanted.

Here's the extractor set up (warning contains extreme hackiness) - 

Okay so I've basically hacked 2 hoovers together ;-)

The old hoover was a tub type effort, so I've kept the tub part and removed the motor and it's housing, then I basically made a lid for it that I could fix the hose from the other hoover to.

It looks rough (and it is) but it does the job, basically I'm using the tub as a storage bin for wood shavings and such like, and the other hoover is a replacement for the old motor, it works well because unlike the old hoover this still has some of it's filters intact so the motor doesn't get dusty and burn out like the last time (oops)

How it works is simple enough, hoover A provides suction and hoover B provides a storage bin, wood shavings get sucked into the bin and any fine dust is filtered out by hoover A's filters.

The storage bin -

The tub holds a fair bit of waste.

When it's full I bag up the shavings and I intend to use it as mulch on the garden and down the allotment, I've also discovered that the filter collects very fine wood dust, which when mixed with some pva makes for a pretty good wood filler :-)

The fine dust -

Very fine and great for making wood filler.

I've also found out that I can connect the extractor up to all my power tools, or at least the ones that have dust outlets on them, which may come in handy if I need to use them in the house.

You could also make a wooden box to do the same thing, you'd just need to make it so that you could connect your hoover to it, and it would need to be sealed as well, with some kind of removable lid for emptying it, which is what I would have done if I'd had a little more time.

And there you have it, even if something doesn't have an immediate use anymore (like an old pc desk) it may well have a use in the future, so it's worth hanging on to it for a short while.

Thanks for reading.

I think I'm becoming a Womble ... ...

Yes I really do think I'm becoming a Womble, what's a Womble ? well for those who don't know these are Wombles (opens in new window) basically they made use of stuff people had thrown out, a blast from the past ? I used to watch the tv program when I was a kid, maybe this is responsible for my recent evolution into Wombledom ?

It's interesting, least I think it is, that back then there were tv programs about what is essentially re-cycling, and up-cycling, seems these days it's all about reduce, re-use and re-cycle, which to be honest I see nothing wrong with, maybe the Wombles knew something we didn't ?

I'm not going to get all environmental, but I think it's a good idea to reduce waste, and re-cycle what we can, for a start it's cheaper to re-use stuff than buy new, saving money is always good in my book. I also think a little less rubbish about won't be a bad thing either, and not because it'll save the planet, would you want to live next to a land fill site ? I know I wouldn't.

Anyway it seems that just lately I have been viewing things with a slightly different way of thinking, on my travels I often see things that people have thrown out and think what could I use that for ?

Seems a lot think that if you dump a load of stuff on the side of the road the council will eventually pick it up, truth is they don't (least not round our way) they'll leave it. If you have rubbish that needs moving then the council will charge for it, there are however people who go about in vans picking this stuff up to either sell on, or make use of in some way, modern day rag n bone men, and a lot will have adverts in the local paper, or come round door to do and take your unwanted stuff away for nothing, all it costs is a phone call.

On my weekly shopping run I go past a number of houses that seem to just dump stuff on the side of the road, one house in particular stands out, and a few weeks ago I noticed they had an old glass door outside, at the time I looked but thought as it was in good shape it wouldn't be there for long (I had an idea of what I could use it for)
I was wrong, the door sat in the same place for about three weeks, so the other day I thought right, I'm having it, I did knock on the door of the house to see if it was okay, they said yes, so I stuck it in my cycle trailer (which had the weekly shop in it already) and off I went.

This is what I made out of it - 

Yes another cold frame, made from old door and pallets.

I had already decided the door would make a great lid for a cold frame, and seeing as I had some wood left from my recent pallet experiments I figured it was a good idea :-)

It's easy to make something like this, and if you use the materials I have then it'll cost hardly anything, just a little time and effort. A wooden cold frame the same size as this (about a 100cm x 75cm) could be as much as twenty or thirty quid, mine cost about 2 hours in all :-)

To make something like this, is pretty easy, even for the less experienced diy types, it's basically a box with a lid, this one took a little more work as it's made from planks rather than sheets of wood, I used the same method for building this as I did for the re-cycled planter I made not so long ago.

The wood for the box - 

As you can see it's in strips, roughly 3 inches wide

The main disadvantage of doing things this way is that you have to stick each strip together to build up the box sides, it takes a little longer than just using a sheet of ply.

To connect the strips I just used another piece of pallet on each end, this also served as a fixing for the other sides.

This piece keeps the strips together.

You can use nails to fix it all together, but I tend to use screws for this type of thing, just to make sure it doesn't fall apart. For fixing the screws (I used 1inch screws for this) I have a handy little gadget, it's called a flip driver and if you use a cordless drill for wood working I'd suggest getting one, they are very handy and save time and the battery of your cordless drill.

My flip driver -

Saves time, and battery power.

The pictures aren't the best, but you can see that it has two parts, the holder that locks into the drills chuck and the bit holder and drill part, this is the part you flip round, depending on what you're doing.

The bit holder and drill -

One end for drilling and the other for driving.

What's really good about this little tool is that you can adjust how long to have the drill bit, depending on the depth you want for your pilot hole, and it also has a built in counter sink, so you can drill and counter sink at the same time, then all you do is flip it round and drive your screw in, no removing drill bits from chucks to put the driver in, you can pick them up pretty cheaply and you usually get three bit / drill bit holders, each take a different size drill bit, and each will have a slightly different sized counter sink.

Not very clear, but you can make out where it's counter sunk.

Another money saving tip, if you are going to use screws for your next wood working project, my advice is look to see where your nearest builders yard is, the reason being is that a box of 200 (1inch) screws cost me about two quid at my local builders yard, that includes VAT, the same box of screws at a diy store (you know the places I mean, B&Q, Homebase) will cost about five quid, sometimes more, so save some money, look for your local builders yard (Build center is a good place) and what's more if you need loads of screws you can usually get a discount as well (Screwfix.com is another good place for fixings)

Not much to say, it's a box of screws - 

Cheaper than diy stores, just as good.

If you do use pallets to make this sort of thing, you can use this method to make planters as well, then I'd recommend a clamp or two for the simple reason that pallet wood isn't always the straightest stuff, so using a clamp is a good way to make sure it's all nice and snugly together before fixing, as the next picture shows.

Using a clamp to hold things in place - 

Obviously the clamp size depends on the size of the project.

Once you have the two main sections built (the main section being the longest sides) you can then start to add the end, this is just a case of fixing each end to the ones you've already made.

The two longest sides completed -

Next step is to fix the shorter sides in place.

The cold frame I've made is a rectangle because I've made the sides to fit the door I found, but you can make it any size you want, especially if you intend to make your own lid. Once the sides are all fixed you should have a box shape.

Fixing the shorter sides - 

Just add each strip as you go.

After you have added all the side strips (if you used pallets) you should have something like the picture below, which is basically a box.

The finished frame - 

It's vaguely box shape :-)

And there you have it, if you use this method you should end up with a nice rustic looking planter, you can leave the wood as it is, or give it a sand and paint it with a colour of your choosing, you may also want to include a few strips across the bottom so that your plants don't fall out of the planter is moved. 

If you have kids like mine the prospect of a box may be too much for them to resist :-)  

What is it with kids and boxes ?

Now as I was making a cold frame I still had a little to do, mainly fit the door to the box. I could have just stuck the lid on and fixed it in place, but I decided to ad a little slope so that the lid sits at an angle to get a little more light into the box.

As it turns out the lid on this new cold frame is sitting at the same angle as the other one I built a while ago.

I guess there are a few ways you could add an angle to a box, but I just cut some more wood at the angle I wanted.

The angle marked out on wood - 

I made two like this.

You could also use a plane to shave the wood down to the angle you want, after I'd cut the wood all I did was fix it to the edge of the box using some longer screws, I could have added an extra piece of wood to fix to, but decided against it. Instead I drilled a pilot hole with a counter sink in the edge of the wood, I just about got away with it, had the wood been any thinner and I would have, had to use an extra piece of wood to fix to.

The wood used to create the angle, and fixing - 

Just enough room :-)

 And that's about it really, it's just a box with a lid and as I mentioned you can use the same method for building a wooden planter, or even raised planting beds.

For your viewing pleasure - 

So remember you're a Womble (and if you're not, maybe you should have a go)

Thanks for reading.