Allotment Update...

This is the first of many visits to the allotment, I had thought I was starting later than I usual do, turns out I'm a bit earlier this year than last year, and as it happens we have started most of our seeds off earlier than we have in previous years.

Doesn't look like much was done, but you have to start somewhere.

Here's the video -

Thanks for visiting.

Harvesting Grey water...

If you want to collect waste water please do some research into it first, there are things to consider in terms of storing and preventing bacteria buildup, filtration and numerous other things, we've installed a simple system that will only be used in the summer and any water will only be stored temporarily, so no longer than 24 hours

For a while now we've talked about trying to save more water, we have 5 waterbutts for collecting rain water, but we felt we could collect the water from showers and baths.

So to that end we've installed a very simple system to divert the water from the bathroom waste to a temporary storage tank (waterbutt) for use in the summer months for watering the ornamental plants.

It's a really simple install, it does involve some basic plumbing however, I've used solvent welds for this as I prefer that to push fit.

The valve we're installing is made by a company called Watertwo and it costs about 30 pounds, and here's a link to their website - https://watertwo.co.uk/the-watertwo-device/

Here's the rough installation guide -

Thanks for visiting.

Glass sphere / crystal ball stand...

My wife has a new glass sphere which she wanted for taking pictures through, it does come with a small glass holder, but she wanted something a little more sturdy so I made a stand for the sphere from a piece of oak.

The wood has some cracks in it, but I used CA glue to stabilise them and although a simple shape it works well, and looks good with the sphere sitting on it.

Here's the video -

Thanks for visiting.

Turning Picture Frames...

This is a project I started sometime ago, but only just got round to finishing.

It turns out that you can make pretty good picture frames using a lathe, although you will be restricted by the capabilities of your lathe, as in how big you can make them, but you could always go the other way and see how small you can make them. They are pretty easy to make and can be stained or painted to suit your needs, and you can make them from solid pieces of wood or by gluing wood together, it depends on what you can get hold of in terms of materials.

Have a look -

Thanks for visiting.